-Our hydraulic lifts, in addition to their properties like comfort, safety, low costs, being long lasting, immediate delivery time and rescue during a power cut system, also doesn’t need an additional engine room, so an engine room can be installed contiguous to the lift shaft or in a 4 metres distance from the lift shaft.Those are a type of lifts in which the oil is forwarded to the lifting pistons through pipes by the hydraulic pump unit of the drive system and the movement of the cabin is enabled by direct or indirect pistons.
There are advantages and disadvantages of the hydraulic lifts compared to other mechanic types. Let’s shortly summarize them;
1-) In the conditions when it is undesirable to impose weight on the building statics.
(in the structures which are under restoration or revision)
2-) Permisiveness through the designing process of the terrace floor and the ability to reach the terrace floor.
3-) Permissively chosing the location of the engine room
4-) In all the floors, it is maximum 5 metres distance from the lift shaft
5-) Easily meets the need to provide high carrying capacity
6-) Works without expenses while going down.
7-) Works quietly
8-) Sensitive floor adjustment and automatically leveling the cabin to the floor level in both sides.
9-) In the times of possible errors occur, the lift automatically reaches to the intended floor. The drive motor only works when the elevator goes up; while going down, it uses its own weight. This advantage enables the lift to go one floor down during the times when possible errors occur.
10-) Lift-off and stop without impact. Stepless speed adjustment
11-) In the panoramic lift installments, more aestethical appearance with less equipment.
12-) Rising speed can be adjusted without depending on the descent speed.
13-) This advantage can be used to improve the building traffic without improving the motor power.
14-) The entrance to the cabin can be made from 4 sides. (with direct hydraulic pistons in the bottom)
15-) Provides large cabin spaces.